Computer File
Supercritical Ethanol as an Enhanced Medium for Lignocellulosic Biomass Liquefaction : Influence of Physical Process Parameters
In this study, the influence of various physical process parameters on the liquefaction of lignocellulosic
biomass (pine wood) in supercritical ethanol was investigated. The parameters include reaction temperature
(280e400 C), initial nitrogen pressure (0.4e7.5 MPa), reaction time (0e240 min), and biomassto-
solvent ratio (0.06e0.25 g/g). The reaction temperature and residence time were found to have a more
significant effect on biomass conversion and product yield than pressure and biomass-to-solvent ratio
had; conversion in the range 34.0e98.1% and biocrude yield in the range 15.8e59.9 wt% were observed
depending on the process parameters. Despite the absence of catalysts and external hydrogen source,
solid biomass to liquid and gaseous products conversion of 98.1%, and a high biocrude yield of
approximately 65.8 wt% were achieved at 400 C, 120 min, and a biomass-to-solvent ratio of 0.06 g/g.
Moreover, the biocrude contained considerably lower amounts of oxygen and higher amounts of carbon
and hydrogen, resulting in a substantially higher heating value (>30 MJ/kg) as compared to raw feedstock
(20.4 MJ/kg). A comparison with sub- or supercritical water-based liquefaction revealed that supercritical
ethanol produced biocrude with a lower molecular weight and much better yield. Finally, a
new biomass liquefaction reaction mechanism associated with supercritical ethanol is proposed.
Barcode | Tipe Koleksi | Nomor Panggil | Lokasi | Status | |
---|---|---|---|---|---|
artsc73 | DIG - FTI | Artikel | Perpustakaan | Tersedia namun tidak untuk dipinjamkan - No Loan |
Tidak tersedia versi lain