Text
OAM-SDM Solution Toward a Submarine Cable
Determining how to add more signal channels without enlarging the cable volume is continually an issue in managing submarine cables. To improve the cost per bit and the power efficiency, space division multiplexing (SDM) is regarded as a promising solution that could be used to address optical density and cable capacity challenges regarding submarine cables. In this study, we focus on angular momentum (OAM) modes supporting few-mode ring-core fiber (RCF) solutions for submarine cables. Considering the inhibition of the hydrogen loss for the submarine cable, we propose a center-region-lifted 3-OAM-mode-group supporting RCF (abbreviated to 3-OAM-MG RCF) with a core-cladding index contrast of 0.6 % , and meanwhile we also design and fabricate a matched 3-OAM-MG erbium-doped fiber (EDF). To confirm the short-haul transmission ability, we conduct a wavelength/mode/polarization division multiplexing (WDM-MDM-PDM) transmission test through a 25.3-km 3-OAM-MG RCF, where the coupled modes inside MG are demultiplexed by using 2 × 2 multiple-input multiple-out (MIMO) equalization. The transmission capacity is approximately 35 Tbit/s and the bit error rates (BERs) of all the channels are less than 2.4 ×10−2 . For the application scenario of long-haul submarine communication, a cascade WDM-MDM transmission system consisting of 3-OAM-MG RCF and 3-OAM-MG EDF is set up, which makes the BERs of all the mode and wavelength channels below the 20 % soft-decision forward error correction (SD-FEC) threshold. It indicates that data-carrying OAM mode multiplexing transmission has potential application in a long-haul submarine cable system.
Barcode | Tipe Koleksi | Nomor Panggil | Lokasi | Status | |
---|---|---|---|---|---|
art146295 | null | Artikel | Gdg9-Lt3 | Tersedia namun tidak untuk dipinjamkan - No Loan |
Tidak tersedia versi lain